Grass-valley EDIUS 5 Manuale Utente Scaricare il pdf (Pagina 13)



Hardware Setting

Setting the Main Board

Before board setting, be sure that your work area is dust-free and dry. Prepare a Philips

screwdriver and an empty box for removed screws in advance.

Also, be sure that your PC is turned off and that the cables (including power) are

removed from the PC.

* The product components vary depending on the product of your purchase.

POINT

See the instruction manual for your PC (motherboard) for the PCI (PCI

Express) slot type.

The slot to set your EDIUS SP / SD / HD varies depending on the

product of your purchase.

See the instruction manual for your PC (motherboard) for the PCI slot type.

- Set the main board (SHX-E1) in the normal PCI slot (64bit / 66MHz PCI).

- 32bit / 33MHz PCI can be used when you edit only SD format videos.

- Set the main board (SHX-E2) in the PCI Express slot (PCI EXpress x1).

- When PCI Express x1 is not available, either PCI Express x4 or x8 can

be used.

- Set the main board (RX-E1) in the normal PCI slot (64bit / 66MHz PCI).

POINT

EDIUS SP-SDI main board (SHX-E2) has a PCI retainer equipped. If

your PC has a slot which supports the full-sized PCI board, set the PCI

retainer to it so that it can retain the EDIUS SP-SDI board. If the board

does not seem to t to a PCI Express slot of your PC because of the

PCI retainer, or if your PC does not have a hook to set the PCI retainer,

remove the PCI retainer from the main board without fail.

How to remove the PCI retainer

Remove three screws xing PCI retainer with driver.

Main board

PCI retainer

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 62 63

Nessun commento

Grass-valley EDIUS 5 Manuale Utente Pagina 13